336 TRS Red Wolves CoinKeesler AFB Challenge Coins

$8.25 each
100+ 200+ 300+ 500+ 1000+
$6.60 $6.19 $5.78 $5.37 $4.95

Details

336th Training Squadron Red Wolves challenge coin at 1.75” diameter with antique silver plating. Your 336 TRS coin has 4 colors of enamel paint on the front, and 4 colors on the back.

Minimum Purchase of 50 Units Required

Estimated Delivery: September 27, 2022

Total: $412.50

Start Your Order

Select a challenge coin below or Create Your Own from scratch online or your can email us to get the ball rolling at info@aviatorgear.com. We'll get back to you within 24 hours to discuss your project and custom design.

Artwork & Revisions 4-5 Days

We should be able to provide a first draft of the artwork proof in 3-5 days for you to review and provide feedback and revisions. Each revision will take 1-2 days to complete.

Placing Your order

Once the design is final, we will quote your project and send you an invoice with payment instructions. You can give us a call with your payment information or use our secure payment link.

Coin Production 3-5 Weeks

If this is your initial order, it will take 7-10 days to create the mold of your coin. Once the mold is finished, production will take 3-4 weeks. Your coin mold will be kept on file for your next order.

Shipped 2-3 Days

Once you approve the sample patch, we will enter your order into full production. Production will take us about 3 weeks.

Fast and Easy Reorders

We will upload your coin design to our website for convenient reorders. We are your continuity book, so you can be assured that your organization's coin design will be available for years to come.

Aviator Gear Challenge Coin Production

Thank you for visiting us! We are ready to bring your challenge coin ideas to life with free design services. Our mission is to take care of your squadron, and make you look good. Let's get started!

Aviator Gear Challenge Coin Sizes

Normally, challenge coins range in size from 1.5" to 2" diameter. We have made coins as large s 6" across! We will create your custom design with free artwork and unlimited revisions. Let's get starte...

Aviator Gear Challenge Coin Plating Options

All challenge coins start out with a base metal of cooper, brass or bronze. The coins are then electroplated to provide the specific color of metal for your coin. Here are some examples of different m...

Aviator Gear Challenge Coin Unique Shapes

Your custom challenge coin can be absolutely and size or shape. Here are some different examples, ranging from the more standard shapes to the more unique and detailed. Let's get started: https://www....

Aviator Gear Soft Enamel Challenge Coins

The intricate designs in these challenge coins are outlined by raised metal edges, while the enamel paint sits in the recessed areas. 3 dimensional scupting can add to the design of your coin. Let's get STARTED

Aviator Gear Challenge Coin Colors & Plating

Our custom challenge coins include many different enamel coloring and metal plating options. From intricate 3-dimensional designs, to unique shapes, we can create the perfect challenge coin for you an...

Aviator Gear Challenge Coin Shapes and Sizes

Our challenge coins can be many different shapes and sizes. Watch this video to see the many variations of our custom challenge coins. Our mission is to take care of your organization, and make you lo...

Aviator Gear Challenge Coin Design Options

Our challenge coins are highly customized, and even personalized with laser engraving. We are ready to bring your ideas to life with free design services and unlimited revisions. Our mission is to tak...

What Determines Cost?

The main drivers of the price for your custom coin will be size, quantity, and any extra features; such as edging, engraving, or consecutive numbering. We always provide a custom quote for our coin designs.

Setup Charge

Your artwork and design consultation is always free with us. Our die (mold) charges are very low ranging from $125.00 - $200.00, depending on the size and design features, which includes both sides of the coin. This die charge is non-refundable and only applies to your initial purchase.

Your Coin, Not Ours

We will never deface your challenge coin. Some companies justify putting their logo on yours as a way to remind you when reordering. Our view is that, if we do our job, you are not only going to remember who made your coin, but rave about the quality and our customer service to all of your friends.

Sample Coin

98% of our clients approval their coin order for production, based on the final approved artwork proof. We can create a physical sample of your coin, prior to full production; however we require a non-refundable payment of the die charge, before we create your sample coins. Once that die has been created, it cannot be modified. Any changes to the coin design, once you receive the sample coin, will require a new mold and another die charge. This is why we are very meticulous about your artwork.

No Epoxy Coating

Many suppliers sell you an epoxy coating as a protective measure for your coin, which we believe is unnecessary. An epoxy coating takes away from the vibrancy of the coin and dulls the colors and the intricate details. The times we will recommend epoxy is when your design has a large area of enamel color, such as our 2" diameter round bottle openers, or to protect screen printed designs.

Challenge Coin Template

We develop all coin designs from scratch. Email us at info@aviatorgear.com and let's get started.

Color Chart

Check out our Coin Plating Guide.

Materials Used

Depending on your design; we will use brass, iron, or zinc alloy as the base material. Your coin will then be electroplated with any of our many choices of metal plating options. Check out our Coin Plating Guide.

What Types of Coin Edging Is Available?

Coin Edging Options.

Do You Sell To The Public?

We do not sell to the public or maintain inventory of any of our challenge coins. All of our coins are made to order just for you. All of the designs you see on our website are strictly for customer reorders and to proudly showcase examples of our work. We would never sell your unit's coin to anyone else.

Design File Formats

The preferred format is a vector file of type .EPS or .AI. A high-resolution JPG or PNG of 300 dots per inch (dpi) is the second best. Native file formats in Corel Draw, Photoshop, or Adobe Illustrator, and PDF documents also work great. We can accept and modify pretty much any type of file, such as: .jpeg, .gif, .png, .ppt, .doc, .pdf, .bmp, .tiff, .psd, or .pub.

Can Coins Be Different Shapes?

Absolutely! We can manufacture your coin in any shape, 3-dimensional images, and cut-outs. See some unique coins and bottle openers.

Any questions? get in Touch

Not sure about the details? Or looking for something extra customized? Just drop us a line and we'll get back to you within 24 hours.